Western Development Museum – Saskatoon

The Western Development Museum (WDM), was established in 1949, and has been in its present location since 1972. There are technically four WDM’s, located at Moose Jaw, North Battleford, Yorkton, and Saskatoon, but the area of focus is Saskatoon. The Saskatoon one is called 1910 Boomtown, and focuses on the boomtown era of 1910’s, as well as features vintage automobiles, trains, farm equipment, and other memorabilia.

When you enter the museum you’re presented with an indoor representation of a typical Saskatchewan town. There’s a long wide street with buildings on either side. I’ll go through every building and highlight a bit of history about them, before venturing on to different technologies that were developed in the 1900’s that made vast improvements into people’s quality of life; from farming techniques, automobile development, home improvements, electricity, running water, etc.

Telephone Operator’s House

Telephones were in place in many parts of Saskatchewan by 1910. The main switchboard in most small towns were typically located in the operator’s home. Shown below is what a typical telephone operator’s house would have looked like.

Harness Shop

Harness shops are some of the busiest shops in the small towns of Saskatchewan during the early 1910’s, since animals were the main workhorse, rather than vehicles. The shop keeper was often the town cobbler, and leather worker as well. Shown below is what a typical harness shop would have looked like.

Livery Stable

Livery Stables were used to provide house and feed for horses, which were the main workhorse of transportation in the early 1910’s. Horses were used to pull buggies, wagons, and farm equipment.

Blacksmith Shop

Blacksmiths had a wide variety of jobs ranging from the sharpening of slows, replacing horseshoes, repairing wheels, shaping iron into tools, and manufacturing replacement parts. Metal is heated in a forge, where bellows forced air through the fire to heat the iron. The iron is then held with tongs against an anvil and then shaped into the desired shape with a sledgehammer, before being plunged into water to harden it. Shown below is what a typical blacksmith shop would have looked like.

General Store

General stores are where the citizens could send or receive mail, buy foods, have a coffee, etc. Most items were loose, weighed and bagged, similar to how the modern day Bulk Barn does things. Shown below is what a typical general store would have looked like.

Real Estate Office and Law Office

The homestead system was based on the Dominion Land Survey (DLS). The Dominion Lands Act of 1872 offered up homesteads of 160 acres for $10 if the settler lived on the homestead for a minimum of six months every year for three years, as well as built a suitable home, broke at least 30 acres of land, and seeded at least 20 acres of land. These new homesteads were keeping the Real Estate / Law Offices in these small towns quite busy.

Dentist’s Office

In the early 1900’s dental services were usually performed by general practice doctor, and a dental office was only established after a community had developed to a considerable size to merit a specialist. A dentist usually began his practice with only a manually operated dental chair, and some basic equipment.

Doctor’s Office

Small town doctors were general practioners that faced a wide variety of medical situations ranging from pulling teerh, broken bones, delivering babies, as well as diagnosing and treating illnesses. Occasionally the illness or accident would be severe enough that the doctor would be required to visit that patient in their home, sometimes travelling many kilometres on poor roads.

Drug Store

Drug stores in the early 1910’s did more than count out pills prescribed by doctors. The usually had to mix out their own medications from raw materials. Mortar and pestle’s, scales, beakers, and a compression device were a common staple tool that allowed chemists to manufacture the pills prescribed by the doctor. Drug stores also carried specialty items such as photography equipment, grooming and hygiene supplies.

Royal North West Mounted Police (RNWMP) Detachment

Shown below is an example of what the RNWMP detachment in Watson, Saskatchewan looked like. The detachment had two police officers who lived and worked in the building.

Church

Churches are an important part of a community, and most small towns had a church.

School

Most schools in small towns were just a one-room schoolhouse. Most schools were poorly lit, and quite chilly.

Wing Lee Laundry

Many early laundries were operated by Chinese settlers who originally came to Canada to work on the Canadian Pacific Railway’s western section. The laundromats were usually the home and business of these settlers, with the sleeping quarters typically located in the back.

Sterling Hardware Store

Hardware stores offered a wide variety of items ranging from nails to lamps and tools.

Arctic Ice Company

Before electric fridges arrived to the scene food was kept in insulated ice boxes, and were cooled by a block of ice. In the winter months ice blocks were cut from nearby rivers and lakes. The Arctic Ice Company wagon delivered ice door-to-door for home ice boxes. While the electric fridge was invented in 1913, they were not common-place in homes until the 1930’s when they became more affordable, and safer refrigerants such as Freon were invented. Early electric fridges used ammonia, which wasn’t safe for home use because they often leaked.

Railway Station

Railways were critical to the existence of prairie towns. They brought settlers and supplies, and hauled away produce to other markets. Sometimes towns would relocate to be on a rail line so that they could survive.

Farm Equipment

There was a tremendous amount of farming equipment ranging from steam powered equipment, to gas, diesel and oil powered equipment.

Sod House

Sod houses were common place, especially towards the end of the 1800’s, start of the 1900’s. They were chepa to build, warm in the winter, and cool in the summer. This was the first home for many immigrants.

Bennett Buggy

In the 1930’s, during the Great Depression era, money for gasoline had dried up, so people improvised by repurposing gasoline powered vehicles into horse-drawn vehicles. The engines were usually removed, and straps were attached that could be pulled by a horse.

Depression House

The Great Depression was a severe worldwide economic depression that occured from 1929 until the late 1930’s. It was the longest and deepest depression in the 20th censure. It started in the United States after a major fall in stock prices that began on September 4th 1929, and was worldwide news by October 19th 1929. This was also known as Black Tuesday. Between 1929 and 1932 the world economy shrank by 15%. By comparison, the Great Recession of 2008-2009 the world economy only shrank by 1%. Unemployment also rose to nearly 23%! Unfortunately also during these times the Canadian and USA prairies were also pummeled with severe wind storms which would pile dust against the side of peoples homes, sometimes up to the roof. Dust would even make its way inside the home and cover everything. An example of a depression-era home is shown below.

Rural Electrification

In the 1920’s homes were introduced to the magic of electricity, with the 32 Volt home electricity “Light Plant”. Light plants consisted of a gas engine (sometimes a wind turbine), an electric generator (also known as a dynamo), and a storage battery. The storage batteries consisted of sixteen 2 Volt gas storage batteries, usually split into two rows of eight to save on space. Farm light plants were typically stored in the basement and were installed on a concrete foundation to minimize vibration. The light plants could run small 32-volt appliances such as butter churns, washing machines, tools, and lights. Light plants provided electricity for many rural homes until the 1950’s, when the last of Saskatchewan’s rural farms were finally connected to the power grid.

Implement Dealer

Implement dealers were placed close to railway stations in order to take easily delivery of shipments of steam engines, gas tractors, and other agricultural machinery that was purchased by the citizens in the town for use on their homesteads.

Banks

In the early years of banking, each bank company issued it’s own currency. Banks in this era were built to give the impression of a solid and trustworthy image. Architecture during the 1910’s featured false columns on the front of banks, sturdy dark wood furniture, and wrought iron teller windows.

Craft Parlour

Craft Parlours provided women with craft supplies to make clothing, rugs, quilts, etc.

City Garage

Between the 1910’s and 1920’s cars were often sold by farm implement dealers who often knew very little about them. This often led to the need for a service industry to provide repairs and accessories for them, which spun the need for independent garages.

Boomtown Photo Studio

Photography equipment was not owned by the average citizen so if a professional portrait was required a visit to a city photo city was a necessity. City photo studies typically held a studio camera, a room with interchangeable backdrops, and a dedicated dark room to develop the film.

Fire Hall

Many Canadian homes are built of wood, and are susceptible to house fires. Making matters worse was older homes typically contained electrical wiring that didn’t have electrical grounding, and exposed wires (think rod and spoke inside walls with newspaper as insulation). Fire Halls were as much a necessity as they are now. Firefighting equipment – hand, steam, or compressed gas – stored in small wooden firehalls were operated by volunteer firefighters.

Town Office

Town halls were the centre of business and handled all local administration, and date back to early roman times.

Clock Shop

Clock shops in the early 1900’s were more than a place where people could buy clocks. The jeweler sold and repaired watches and clocks, handled china and silver, and acted as the local optometrist. Keeping time was a lot harder in the early 1900’s than our internet connected devices of today.

Butcher Shop

Electrical refrigeration didn’t exist in the early 1910’s. Food was preserved with ice and kept fresh in ice boxes. Butchers were an essential retailer as many families didn’t even have access to ice block service.

Newspapers

Today we can just look at our iPhones, or turn on our televisions to get the news, however at the turn of the 1900’s news travelled much slower. Newspapers were printed on a daily or weekly basis and delivered door to door. International news sometimes took as long as 1-3 months to reach Canada.

Barber Shop and Pool Hall

Barber Shops at the turn of the 1900’s often contained a public bath area where a person sat on the surrounding rim with his feet in the basin. Water drained through a small hole under the seat. Pictured below is a historic barber chair.

Transportation Gallery

The museum featured a transportation gallery that encompassed all sorts of vehicles from the early 1900’s through to modern times. There were even some electric vehicles and renewable fuel vehicles at the turn of the 1900’s that were quite interesting.

Believe it or not but electric cars have been around since the 1880’s. The very first electric car was developed by Gustave Trouve from Paris, France. Electric cars were widely used between 1881 and 1912, even more popular than gasoline / diesel powered cars. In fact six electric cars held the land speed record in the 19th century, with one of them reaching 106 kph in 1899, which was unheard of during those days. The internal combustion engine took over as the main engine of choice, until roughly the late 1970’s, when the fuel crisis hit. Electric vehicles eventaully started to gain traction again, including this weird looking vehicle called the ElecTrek pictured below. The ElecTrek was developed by Unique Mobility from Denver, Colorado. When it went on sale in 1982 it could reach highway speeds, however could only got 132 km (82 miles) on a charge, and ran on 16 heavy lead-acid batteries, which posed an issue with limited charge cycles and recyclability. The electric vehicle wasn’t quite ready for mass-production again. General Motors (GM)came close in 1996 with the EV1. The vehicle was highly favoured by its owners, however they lived a short life because in 1999 GMended production. There was also another catch because GM never let you purchase them, rather lease them for a 3 year period. Once the lease period was over GM crushed most of the vehicles, and distributed a few to museums. This was a huge blow to the electric vehicle scene. The 2000’s sat quiet, until Tesla came to the picture in 2003 and has since produced over 1 million electric vehicles. I myself own a Toyota Prius PRIME plug-in-hybrid, of which only 50,000 per year are produced. I love my car, and honestly don’t see myself driving a non electric vehicle here-on-in.

What do we have here? Pictured below is a McLaughlin Motors Model E35 powered by straw gas. Basically it was a regular vehicle that could burn straw gas. A gas bag was fitted to the car’s frame, with a hose to pipe the gas into the carburetor, and a valve that could be opened or closed depending on whether the car was run on straw gas or gasoline. The issue with running a car on straw gas was that the 300 cubic feet of gas had less stored capacity than 1 gallon (3.78 litres) of gasoline, so it could only go for an extremely short distance. This was one of the first “renewable fuel” vehicles ever produced.

Steam powered cars were prevalent until the end of the 1920’s In the early 1900’s automotive propulsion technology was highly experimental with gasoline, electric, and steam all contending to be the dominant technology of choice. Steam power was somewhat preferred during the late 1910’s to the early 1920’s because of its simplicity of operation, maintenance, and smooth / quiet ride. By the 1920’s steam was on its way out as gasoline alternatives were becoming significantly cheaper and faster. The vehicle pictured below is a 1926 Brooks steam car, of which only 18 were built. The car had only 38 moving parts, and featured unique technologies such as a flash boiler wrapped in 5 km of piano wire, and a body made of a light-weight composite fabric called Meritas.

Cobalt-60 Beam Therapy Unit

The original Cobalt-60 Beam Therapy Unit was an innovation in healthcare that had a worldwide impact in cancer treatment. Saskatchewan had a very high cancer rate developing between 1924 and 1941, and the government decided they would offer free cancer treatment to everyone living in Saskatchewan, and gave the green light to the University of Saskatchewan to develop the “Cobalt Bomb”. In 1951 the “Cobalt Bomb” was finalized to treat cancer. The very unit on display in this museum treated 6728 patients until it was replaced in 1972. Canada is a world leader in cancer treatment innovation for a terrible disease that kills 83,000 Canadians annually, and 9.8 million people worldwide.

I hope you enjoyed reading about all these fascinating facts as much as I did. If you visit Saskatoon I highly recommend visiting this museum. Be sure to check back soon as I continue my summer hiking adventures, and I also have an upcoming trip to Kelowna at the end of June. It’s also looking fairly promising for me to look again at doing my Eastern Europe road trip in the fall.

If you like the content that I produce and want to donate money towards the upkeep of my site, my travel, or buy me a cup of coffee please feel free to contribute towards it. I really appreciate it.

Donate By Clicking Here

Edmonton – Fall 2020

Two weeks ago Julie and I decided to get away from the city for the weekend. I’ve been wanting to go to Edmonton, Alberta’s capital city, for quite some time as the city hosts plenty of well preserved architecture. Julie’s colleagues at work also recommended her quite a few restaurants to visit while we were there.

We left Saturday morning around 9:00am and proceeded North towards Edmonton. First stop was the Reynolds Museum in Wetaskiwin, about two hours North.

The Reynolds Museum was conceived by Stan Reynolds, who had already amassed a large collection of agricultural machinery, airplanes, and automobiles during the mid 1900’s. By 1992 he had donated over 850 artifacts to the Government of Alberta. The province opened up the Reynolds Museum to exhibit these items on September 12th 1992. By the time that Reynolds passed away in 2012 he had donated over 1500 artifacts. Currently over 6600 artifacts belong to the collection, with the majority of them held in the museum’s storage facility.

Stan Reynolds was born on May 18th 1923. He started his career in the Royal Canadian Air Force in 1942 and served in Great Britain as part of the night-fighter squadron. He became one of the youngest pilots to fly Beaufighters and Mosquitos. After World War 2 he was discharged from the air force and returned to Wetaskiwin, where he started selling used cars and become one of the most successful automotive dealerships in Alberta. Reynolds repaired and pained the cars himself and studied for his welding and auto mechanics licenses. Between 1946 and 1958 he operated 13 used car lots. As his business grew he expanded to sell new and used trucks, farm machinery, industrial equipment, house trailers, and even airplanes!

Reynolds recognized the growing important of aviation and needed a place to land his plane so he built and operated the Wetaskiwin airport until he transferred it to the City and County of Wetaskiwin in 1969. He sold the airfield for $30,000 for less than half the market value, and in return he was given perpetual free use of the airstrip and taxi trip between the airport and his property.

As his business grew, so did his collection. One of his business slogans was ‘Stan Takes Anything In Trade’. By 1992 he had donated over 850 artifacts to the Government of Alberta and by the time he passed away in 2012 he had donated over 1500 artifacts.

Motoring started in Alberta in 1906 when the Alberta Government passed the first motor vehicle act. Vehicle owners had to register their cars with the provincial secretary for $2. They were then allowed to travel at 10 kph in settled areas, and 20 kph in rural areas. They were held responsible for damages in any accident with a horse drawn carriage. In 1911 the act was revised to give horse-drawn vehicles the upper hand by requiring motorists to slow down when passing a horse, or even stop when requested by a wagon or buggy driver. The act also required motor vehicles to have “adequate brakes” and a horn, gong, or bell. By 1911 there were over 1500 motorized vehicles on Alberta rodes and the horse-drawn carriage era was coming to an end.

Early vehicles were right-hand drive, a direct carry-over from horse drawn carriages. Many cars had leaf springs and wooden spoked wheels like their carriage counterparts.

One of my favorite cars from the collection is the 1929 Duesenberg Model J. The car was donated to the museum on December 21st 1993. Bernand and Joan Aaron drove across Canada to deliver the automobile to the museum. The vehicle had over 20 owners by the time it was donated. Only 470 Model J’s were produced between 1929 and 1937. The original price tag was roughly $20,000 USD in 1929, which equates to roughly $305,000 USD today.

The rest of the museum featured cars from the early days of motoring up to about the 1970’s. My second favourite part of the museum is the old fashioned art deco style gas station with the cars displayed out front.

After spending a good two hours in the museum we drove to Leduc to have lunch at Vietnam Paradise Restaurant. We both had sate beef pho. It was decent, but a little oily for my taste.

After having lunch we drove to downtown Edmonton, where I ended up parking my car at the Art Gallery of Alberta so that we could walk around. The Art Gallery of Alberta was established in 1924 as the Edmonton Museum of Arts. In 1956 the museum was renamed the Edmonton Art Gallery. Between 1924 and 1969 the museum occupied a number of locations until it was relocated to its present location in 1969. The building was originally a brutalistic style building until it underwent a $88 million redevelopment from 2007 to 2010. The building has a collection of over 6000 pieces of art work.

We walked around downtown exploring various old buildings such as the Kelly Building, Churchill Wire Centre, The McLeod Building, Fairmont Hotel MacDonald, and the 100 Street Funicular.

The Kelly Ramsey Building was built by blacksmith John Kelly. The building, owned by James Ramsey, was built because James required more space for his department store. After Kelly’s death in 1926 John purchased the building for $100,000. He added an extension to his ever-growing business. IN the 1940’s the Government of Alberta purchased the building, until it was purchased by Worthington Properties. In 2009 a fire broke out and destroyed most of the interior of the building. It was later determined that arson was involved, and a man was arrested. In 2013 the building was demolished and replaced by the 25-storey Enbridge Center, which recreated the original building facades on the tower’s podium.

The Churchill Wire Centre, also known as the Telephone Building, was built between 1945 and 1947. It is an excellent example of the Stripped Classicism style of architecture, which is a subset of the Moderne style. The two and a half storey granite and terrazzo clad structure is a great example of the early use of prefabricated exterior components, and was designed by Edmonton’s former city architect Maxwell Dewar.

The McLeod Building is a nine-storey building that was built between 1913 and 1915. It was designed in the Chicago Commercial style, and is the only remaining terracotta-clad building in Edmonton. The building reflects the Edwardian-era architectural influences that were prevalent in Edmonton at the time. The Edwardian-era is a spinoff of neo-classicism that was reinvented at the Chicago World’s Fair of 1893, which became very popular in American cities in the early twentieth century. The building was designed after the Polson Block in Spokane Washington, and was designed by the same architect, J.K. Dow.

The Fairmont Hotel MacDonald was designed by architect’s Ross and MacFarlene and was constructed for the Grand Trunk Pacific Railway in 1915. The hotel which stands 48 metres (156 feet) tall and contains 11 floors and overlooks the North Saskatchewan River. When the Grand Trunk Pacific Railway went bankrupt its management was taken over by Canadian National Hotels, before being sold to Canadian Pacific Hotels in 1988. Today it it currently run by Fairmont Hotels and Resorts. The hotel has undergone several renovations and expansions, including an expansion wing that was added in 1953. In 1983, Canadian National Hotels ceased operations, and the expansion wing was also demolished. The design of the building was inspired by designs found on French Renaissance architectural-era chateaus and features pitched sloped roofs which include chimneys, finials, and turrets. The façade of the building is made from Indiana limestone.

Out front I saw a beautiful Mercedes C Class sedan outside the front of the hotel. I feel this image could be featured on a Mercedes ad campaign.

The 100 Street Funicular is a newly built funicular in front of the Fairmont Hotel MacDonald, which has a staircase that runs alongside it, brings people from 100 Street by the hotel to the area around the Low Level Bridge. The funicular, which cost $24 million, was designed by DIALOG, and opened in 2017.

After walking around it was time for dinner. We moved the car and parked it outside the Neon Sign Museum, which is an open-air display of historic neon signs. We walked to Sabor Restaurant, a Tapa’s style restaurant, where we ordered Piri Piri Prawns, Seared Fresh Scallops, Pork Belly, Spinach Salad, and some drinks. Julie had a glass of red wine, and I had some local pale ale beer.

After dinner we drove to our hotel, the Four Points by Sheraton Edmonton West. I obtained the room for only $40 as I had a $60 Hotels.com voucher that I needed to use before it expired. Even so, the hotel was very inexpensive compared to normal due to COVID-19 really hurting the hospitality industry. You can really find a bargain on hotels at the moment. We spent the rest of the evening relaxing and watching television before going to bed.

The next morning we woke up around 8:30am. We got dressed and went to a nearby McDonald’s for breakfast. I had an Egg McMuffin and Julie had two hashbrowns. We also both ordered coffee’s. We had about an hour of time to kill before we met up with my friend Heather, who I hadn’t seen in many years. Heather and I used to work together at Golder Associates, before we both decided to pursue different career paths.

We explored the Oliver Exchange Building, the Alberta Legislature Building, the Federal Building, and Edmonton Public Library – Jasper Place, and The Gibson Block Building.

The Oliver Exchange Building is a two-storey wood and brick structure that was designed by Allan Merrick Jeffers, one of the architects responsible for the Alberta Legislature building. The building was built in 1913 and was one of the most unique telephone building in Canada because it was highly automated. Instead of staffed pull-and-plug switchboards, it featured state-of-the-art automated switching equipment to keep up with the growing demands of the city. The building was purchased and renovated in 2016 and currently houses a bunch of boutique shops.

The Federal Building was built in 1958 to house the Western Canadian offices of the Government of Canada. It was sold to the Government of Alberta in 1988 and sat vacant until 2020. The building was first proposed in the 1930’s but construction didn’t start until 1955. This Art Deco building took its inspiration from the Empire State Building and the Chrysler Building, located in New York City.

The Gibson Block Building, also known as the Flatiron Building, is a large wedge-shaped four-storey brick building, which resembles a mini version of New York’s Flatiron building. The building was designed by William Gibson and was constructed in 1913. The building was originally built to provide first floor retail space, with offices on the remaining floors. The building was used for a variety of different things over the years, including the Turkish Baths, which were closed in 1978.

We met with Heather at Earls for lunch and had some great conversation before saying bye. It was great to catch up with Heather after all these years.

After lunch we drove to old Strathcona, where we walked around and explored all the old buildings, as well as got some candy from a store called Rocket Fizz. We then had a quick stop at Situation Brewing for a quick pint before heading home towards Calgary. For dinner we stopped in Red Deer for Vietnamese food at Vietnamese Garden.

What’s in store for me next? I’m not entirely sure as COVID-19’s second wave is here, and there is rumours of another lockdown coming soon. I will most likely focus on my drone photography skills over the winter time, and we also hope to travel to Northern Alberta to have a chance of seeing the Northern Lights (Aurora). Be sure to check back from time to time to see what I’m up to. Until next time…

If you like the content that I produce and want to donate money towards the upkeep of my site, my travel, or buy me a cup of coffee please feel free to contribute towards it. I really appreciate it.

Donate By Clicking Here

2018-05-20 – US Route 66 Day 4

Today we drove 229 miles from St. Robert, Missouri to Miami, Oklahoma. We ended up staying at The Hamptons by Hilton. We saw the following sights today:

  • Hooker Cut, Devils Elbow. Hooker Cut is the first dual carriageway on Route 66.
  • Elbow Inn and BBQ, Devils Elbow
  • Sheldons Market, Devils Elbow
  • Frog Rock, Waynesville
  • Uranus Fudge Factory, St. Robert
  • Gascozark Café Remains, Gascozark
  • Munger Moss Motel, Lebanon
  • Starlite Lanes, Lebanon
  • Town of Marshfield
  • Best Western Route 66 Rail Haven, Springfield
  • Rest Haven Court, Springfield
  • Steak n Shake, Springfield
  • Abou Ben Adhem Shrine Mosque, Springfield
  • Sky Eleven Springfield. This high rise was built in 1911. It was an office building that started falling apart in the early 2000’s. They restored it recently and turned it into some very swanky apartment buildings. Monthly rent is only around $600/mth.
  • Rock Fountain Court Motel, Springfield
  • Gay Parita Station, Everton
  • Spencers Gas Station, Miller
  • Boots Court Motel, Carthage
  • 66 Drive In Theatre, Carthage
  • Superman Museum, Carterville
  • 1920’s Service Station, Webb City
  • 1950’s Service Station, Webb City
  • Plaza Motel, Joplin
  • Cars on Route 66, Galena
  • Town of Galena
  • Baxter Springs Rainbow Bridge, Baxter Springs
  • Town of Baxter Springs
  • Dairy King, Commerce
  • Allens Conoco, Commerce
  • Kuku, Miami. We ate here. We both had a cheeseburger with a raspberry milkshake that was so thick you couldn’t drink it through a straw.
  • Coleman Theatre, Miami
  • Vintage Gas Station, Miami

IMGL5153IMGL5181IMGL5186IMGL5192IMGL5193IMGL5195IMGL5207IMGL5208IMGL5213IMGL5214IMGL5227IMGL5241IMGL5244IMGL5250IMGL5251IMGL5266IMGL5277IMGL5279IMGL5286IMGL5296IMGL5305IMGL5312IMGL5315IMGL5321IMGL5327IMGL5345IMGL5350IMGL5351IMGL5358IMGL5361IMGL5362IMGL5363IMGL5367IMGL5370IMGL5374IMGL5381IMGL5387IMGL5400IMGL5403IMGL5427IMGL5432IMGL5435IMGL5436IMGL5445IMGL5449IMGL5457IMGL5459IMGL5478IMGL5481IMGL5492

If you like the content that I produce and want to donate money towards the upkeep of my site, my travel, or buy me a cup of coffee please feel free to contribute towards it. I really appreciate it.

Donate By Clicking Here

2018-05-19 – US Route 66 Day 3

Today we drove 156 miles from St. Louis, Illinois to St. Robert, Missouri. We ended up staying at Studio Z, a pretty swanky chic hotel in St. Robert for only $60 per night. We ended up having a beer in the bar and chatting with the woman running the hotel. We saw the following sights today:

  • Chain of Rocks Bridge, Illinois
  • St. Louis Arch, St. Louis
  • Ted Drewes Frozen Custurd, St. Louis
  • Musuem of Transport, St. Louis
  • Assured Automotive, Eureka
  • Hot / Cold Towers, St. Clair
  • Meramec Caverns, Stanton
  • Circle Inn Malt Shop, Bourbon
  • Bourbon Water Towers, Bourbon
  • Mural in Cuba, Cuba
  • Missouri Hick BBQ, Cuba. Dad had St. Louis Ribs with Mustard Potato Salad and Baked Beans. I had a Brisket Sandwich with Salad.
  • Wagon Wheel Motel, Cuba
  • World’s 2nd Largest Rocking Chari, Fanning
  • Mule Trading Post, St. James.
  • Stonehenge Replica, Rolla

IMGL4325IMGL4335IMGL4351IMGL4388IMGL4397IMGL4399IMGL4408IMGL4417IMGL4423IMGL4453IMGL4457IMGL4464IMGL4476IMGL4485IMGL4497IMGL4506IMGL4547IMGL4564IMGL4572IMGL4578IMGL4593IMGL4687IMGL4699IMGL4724IMGL4734IMGL4743IMGL4749IMGL4752IMGL4776IMGL4780IMGL4785IMGL4788IMGL4790IMGL4793IMGL5104

If you like the content that I produce and want to donate money towards the upkeep of my site, my travel, or buy me a cup of coffee please feel free to contribute towards it. I really appreciate it.

Donate By Clicking Here